Vehicle Speed Sensor - MTR

DESCRIPTION
The vehicle speed sensor.MTR is built into the speedometer assembly. The sensor tunctions as an auxiliary device to the revolution sensor when it is malfunctioning. The TCM will then use a signal sent from the vehicle speed sensor.MTR.





TCM TERMINALS AND REFERENCE VALUE
Remarks: Specification data are reference values.





ON BOARD DIAGNOSIS LOGIC

DIAGNOSTIC TROUBLE CODE (DTC) CONFIRMATION PROCEDURE

CAUTION:
- Always drive vehicle at a safe speed.
- If conducting this "DTC CONFIRMATION PROCEDURE" again, always turn ignition switch "OFF" and wait at least 5 seconds before continuing.

After the repair, perform the following procedure to confirm the malfunction is eliminated.








With Consult
(1) Turn ignition switch "ON" and select "DATA MONITOR" mode for "A/T" with CONSULT.
(2) Start engine and accelerate vehicle from 0 to 25 km/h (0 to 16 MPH).

OR





Without Consult
(1) Start engine.
(2) Drive vehicle under the following conditions:
Selector lever in "D" position and vehicle speed higher than 25 km/h (16 MPH).
(3) Perform self-diagnosis.
Refer to TCM SELF-DIAGNOSTIC PROCEDURE (No Tools).





DIAGNOSTIC PROCEDURE