Models Without Theft Warning System

Power is supplied at all times
^ to ignition switch terminal (1)
^ through 30 A fusible link (letter (g) ,located in the fuse and fusible link box).
With the ignition switch in the START position, power is supplied
^ through terminal (5) of the ignition switch
^ to clutch interlock relay terminal (3)

With the ignition switch in the ON or START position, power is supplied
^ through terminal (3) of the ignition switch
^ to clutch interlock relay terminal (1).
Ground is supplied to clutch interlock relay terminal (2) , when the clutch pedal is depressed through the clutch interlock switch and body grounds (E42) and (E28).
The clutch interlock relay is energized and power is supplied
^ from terminal (5) of the clutch interlock relay
^ to terminal (2) of the starter motor windings.
The starter motor plunger closes and provides a closed circuit between the battery and the starter motor. The starter motor is grounded to the engine block. With power and ground supplied, cranking occurs and the engine starts.