Fuse Block: Locations

Passenger Compartment








Engine Compartment





INTERIOR ROOM LAMP





Power supply and ground
Power is supplied at all times:
- through 4OA fusible link (Letter [d], located in the fuse and fusible link box)
- to circuit breaker-1 terminal 1
- through circuit breaker-1 terminal 2
Power is supplied at all times:
- through 1OA fuse [No. 24 located in the fuse block (J/B)]
With the ignition key switch in the ON or START position, power is supplied: through 10A fuse [No. [8], located in the fuse block (J/B).

MODELS WITHOUT POWER DOOR LOCKS
Power is supplied at all times:
- through 10A fuse [No. [24], located in the fuse block (J/B).

WARNING CHIME





MODELS WITH POWER DOOR LOCKS
Power is supplied at all times:
- through 10A fuse [NO: 24 located in the fuse block (J/B)]
Power is supplied at all times:
- through 1OA fuse (No. 34,located in the fuse and fusible link box)
Power is supplied at all times:
- through 4OA fusible link (letter d, located in the fuse and fusible link box).
- to circuit breaker - 1 terminal 1
- through circuit breaker - 1 terminal 2
With the ignition switch in the ON or START position, power is supplied: through 10A fuse [No. 8, located in the fuse block (J/B).

MODELS WITHOUT POWER DOOR LOCKS
Power is supplied at all times:
- through 10A fuse {NO 24 located in the fuse block (J/B)]
Power is supplied at all times:
- through 1OA fuse (No. 34,located in the fuse and fusible link box)
With the ignition switch in the ON or START position, power is supplied: through 10A fuse [No. 8, located in the fuse block (J/B)]

AUTOMATIC SPEED CONTROL DEVICE (ASCD)





When the ignition switch is in the ON or START position, power is supplied:
- through 10A fuse [No. 8, located in the fuse block (J/B)]
Power is supplied at all times:
- through 15A fuse [No. 14, located in the fuse block (J/B)].
Power is supplied at all times:
- through 1OA fuse [No. 40, located in the fuse and fusible link box]

POWER DOOR LOCK





Power is supplied at all times:
- through 4OA fusible link (Letter [D], located in the fuse and fusible link box)
- to circuit breaker-1 terminal 1
- through circuit breaker-1 terminal 2
Power is supplied at all times:
- through 10A fuse [No. 24, located in the fuse block (J/B)]

MULTI-REMOTE CONTROL SYSTEM





Power is supplied at all times:
- through 4OA fusible link (letter d, located in the fuse and fusible link box).
- to circuit breaker-1 terminal 1
- through circuitbreaker- 1 terminal-2
Power is supplied at all times:
- through 10A fuse [No. 24,located in the fuse block (J/B)]
Power is supplied at all times:
- through 1OA fuse [No. 24, located in the fuse block (J/B)]
With the ignition switch in the ON or START position, power is supplied:
- through 10A fuse [No. 8, located in the fuse block (J/B)]
With the ignition switch in the ACC or ON position, power is supplied:
- through 10A fuse [No. 10, located in the fuse block (J/B)]

THEFT WARNING SYSTEM








Power is supplied at all times:
- through 10A fuse [NO. 24 located in the fuse block (J/B)]
Power is supplied at all times:
- through 4OA fusible link (letter d, located in the fuse and fusible link box)
- to circuit breaker-1 terminal 1
- through circuit breaker-1 terminal 2
With the ignition switch in the ACC or ON position, power is supplied:
- through 1OA fuse [No. 10, located in the fuse block (J/B)]
With the ignition switch in the ON or START position, power is supplied:
- through 10A fuse [No. 8, located in the fuse block (J/B)]
With the IGNITION SWITCH in ON or START position, power is supplied:
- through 1OA fuse [No. 25, located in the fuse block (J/B)].
With power and ground supplied, power to the clutch interlock relay (M/T models) or inhibitor relay (A/T models) is interrupted. The starter motor will not crank and the engine will not start.
Power is supplied at all times:
- through 10A fuse (No. 41 located in fuse and fusible link box).