Component Tests and General Diagnostics

TROUBLE SYMPTOMS CHARTS





^ All functions of remote control system do not operate.





^ Some functions of the multi-remote controller do not operate.

NOTE:
^ The unlock and trunk open operation of multi-remote control system does not activate with the ignition key inserted in the ignition key cylinder.
^ The lock operation of multi-remote control system does not activate with the key inserted in the ignition key cylinder or it one of the doors is opened.

CONSULT INSPECTION PROCEDURE
1. Turn ignition switch "OFF".





2. Connect "CONSULT" to the data link connector.
3. Turn ignition switch "ON".





4. Touch "START".





5. Touch "IVMS".





6. Touch "MULTI-REMOTE CONT SYS".





^ DATA MONITOR and ACTIVE TEST are available for the multiremote control system.

DIAGNOSTIC PROCEDURES





Diagnostic Procedure 1
NOTE: Remote controller does not function it battery is not set correctly.





Diagnostic Procedure 2








Diagnostic Procedure 3





Diagnostic Procedure 4





Diagnostic Procedure 5





Diagnostic Procedure 6