Power Window - IVMS

OUTLINE
Power window system consists of
^ a BCM (Body Control Module)
^ four LCUs (Local Control Module)
^ four power window regulators
BCM is connected to each LCU via DATA LINE A-1 or A-2 and LCUs supply power and ground to each power window regulator.
When ignition switch is in the "ON" position, power window will be operated depending on power window sub/main switch (which is combined with each LCU) condition.

OPERATIVE CONDITION
^ Power windows can be raised or lowered with each sub-switch or the power window main switch located on the driver's door trim when ignition key is in the "ON" position and power window lock switch on the driver's door trim is unlocked.
^ When power window lock switch is locked, no windows can be raised or lowered except for driver side window.
^ When ignition key is in the "ON" position, to fully open the driver side window, press down completely on the automatic switch (main switch) and release it; it needs not be held. The window will automatically open all the way. To stop the window, pull up down then release the switch.