Mode 6 Data

TEST VALUE AND TEST LIMIT (GST only - not applicable to CONSULT)

The test value is a parameter used to determine whether diagnostic test is "OK" or "NG" while the ECM is monitored during self-diagnosis. The test limit is a reference value which is specified as the maximum or minimum value and is compared with the test value being monitored.
Items for which these data (test value and test limit) are displayed are the same as SRT code items (11 diagnoses).
These data (test value and test limit) are specified by Test ID (TID) and Component ID (CID). These data can be displayed on the GST screen.






TEST VALUE AND TEST LIMIT (GST ONLY - NOT APPLICABLE TO CONSULT-II)

The Following is the information specified in Mode 6 of SAE J1979.
The test value is a parameter used to determine whether system/circuit diagnostic test is "OK" or "NG" while being monitored by the ECM during self-diagnosis. The test limit is a reference value which is specified as the maximum or minimum value and is compared with the test value being monitored.
Items for which these data (test value and test limit) are displayed are the same as SRT code items.
These data (test value and test limit) are specified by Test ID (TID) and Component ID (CID). These data can be displayed on the GST screen.

Attachment 8:

EMISSION-RELATED DIAGNOSTIC INFORMATION ITEMS

1 Of 3:

2 Of 3:

3 Of 3: