BATT/FLUID TEMP (and TCM Power Source)

DESCRIPTION
The A/T fluid temperature sensor detects the A/T fluid temperature and sends a signal to the TCM.






CONSULT REFERENCE VALUE IN DATA MONITOR MODE
Remarks: Specification data are reference values.






TCM TERMINALS AND REFERENCE VALUE
Remarks: Specification data are reference values.






ON BOARD DIAGNOSIS LOGIC



DIAGNOSTIC TROUBLE CODE (DTC) CONFIRMATION PROCEDURE
After the repair, perform the following procedure to confirm the malfunction is eliminated.










With CONSULT
(1) Start engine.
(2) Select "DATA MONITOR" mode for "A/T" with CONSULT.
(3) Drive vehicle under the following conditions:
Selector lever in "D" position, vehicle speed higher than 20 km/h (12 MPH).










DIAGNOSTIC PROCEDURE


COMPONENT INSPECTION
A/T fluid temperature sensor









Check resistance between two terminals while changing temperature as shown at left.