Disc Brake System: Service and Repair

After replacing or refinishing brake rotor, perform the following burnishing procedure of the brake pad contact surfaces.

CAUTION: Due to road conditions and traffic safety, use extreme caution when performing this procedure.

1. Drive the vehicle on a straight smooth road at 50 km/h (30 MPH).
2. Use medium brake pedal/foot effort to bring the vehicle to a complete stop from 50 km/h (30 MPH). Adjust brake pedal/foot pressure such that vehicle stopping time equals 3 - 5 seconds.
3. To cool the brake system, drive the vehicle at 50 km/h (30 MPH) for 1 minute without stopping.
4. Repeat steps 1 - 3 ten times or more to complete the burnishing procedure.