Removal

REMOVAL

CAUTION: Before servicing SRS, turn the ignition switch OFF, disconnect both battery cables and wait for at least 3 minutes. Always work from the side of an air bag module.

1. Remove glove box lid and glove box.

Front Passenger Air Bag Module - Removal:

2. Disconnect front passenger air bag module connector.
3. Using the TAMPER RESISTANT TORX (Size T50), remove 3 two special bolts.

Front Passenger Air Bag Module - Removal:

4. Remove four nuts.
5. Remove front passenger air bag module.

NOTE: Air bag module is heavy and should be supported using both hands during removal.

CAUTION:
- Always place air bag module with pad side facing upward.
- Do not attempt to disassemble air bag module.
- The special bolts are coated with a bonding agent. Do not use old bolts after removal; replace with new coated bolts.
- Do not insert any foreign objects (screwdriver, etc.) into air bag module connector.

Improper Handling Front Passenger Air Bag Module:

- Replace air bag module if it has been dropped or sustained an impact.
- Do not expose the air bag module to temperatures exceeding 90°C (194°F).
- Do not allow oil, grease or water to come in contact with the air bag module.