Rear

RUBBING SURFACE
Check rotor for roughness, cracks or chips.

RUNOUT
1. Secure rotor to wheel hub with two nuts (M12 x 1.25).





2. Check runout using a dial indicator.
- Make sure that wheel bearing axial end play is within the specifications before measuring.
3. Change relative positions of rotor and wheel hub so that runout is minimized.

Maximum runout: 0.07 mm (0.0028 inch)

THICKNESS





Rotor repair limit:
Minimum thickness: 8.0 mm (0.315 inch)
Thickness variation (At least 8 positions): Maximum 0.02 mm (0.0008 inch)

Replace rotor if any of the above do not meet the specifications.