Manual Transmission/Transaxle: Application and ID
MANUAL TRANSAXLEInspection and Adjustment
GEAR END PLAY
AVAILABLE SNAP RING
3rd & 4th synchronizer hub (At input shaft)
1st & 2nd synchronizer hub (At mainshaft)
5th main gear (At mainshaft)
AVAILABLE THRUST WASHER
4th input gear (At input shaft)
Differential side gear thrust washer
AVAILABLE SHIM-INPUT SHAFT END PLAY AND MAINSHAFT AND DIFFERENTIAL SIDE BEARING PRELOAD AND ADJUSTING SHIM
Mainshaft bearing adjusting shim
Table for selecting mainshaft adjusting shim(s)
Input shaft bearing adjusting shim
Table for selecting input shaft bearing adjusting shim(s)
Differential side bearing adjusting shim
Table for selecting differential side bearing adjusting shim(s)