Gear: Specifications

Gear End Play
1st Main Gear 0.23-0.43 mm
2nd Main Gear 0.23-0.58 mm
3rd Input Gear 0.23-0.43 mm
4th Input Gear 0.25-0.55 mm
5th Input Gear 0.23-0.48 mm

Available Snap Ring - 5th Main Gear (At Mainshaft)
Allowable Clearance 0-0.15 mm

Available Thrust Washer - 4th Input Gear (At Input Shaft)
Allowable Clearance 0-0.06 mm