Procedure 2

Inspecting SRS malfunctioning parts by using CONSULT - Diagnosis mode






1. Turn ignition switch OFF.
2. Connect CONSULT to Data link connector.






3. Turn ignition switch ON.
4. Touch "START".






5. Touch "AIRBAG".






6. Touch "SELF-DIAG [CURRENT]".

CONSULT DIAGNOSTIC CODE CHART ("SELF-DIAG [CURRENT]"):

7. Diagnostic codes are displayed on "SELF-DIAG [CURRENT]".
- If no malfunction is detected on "SELF-DIAG [CURRENT" but malfunction is indicated by the "AIR BAG" warning lamp, go to DIAGNOSTIC PROCEDURE 4, Procedure 4diagnosing the following cases:
- "SELF-DIAG [PAST]" (which was previously entered) is still retained in memory.
- The SRS system is malfunctioning intermittently.

8. Touch "PRINT".
9. Compare diagnostic codes to the CONSULT DIAGNOSTIC CODE CHART.Trouble Code Description and Repairs
10. Touch "BACK" key of CONSULT until "SELECT SYSTEM" appears in order to return to User mode from Diagnosis mode, then turn off CONSULT.
11. Turn ignition switch OFF, then disconnect CONSULT and both battery cables.
12. Repair the system as outlined by the Repair order in CONSULT DIAGNOSTIC CODE CHART that corresponds to the self-diagnostic result.
13. After repairing the system, connect battery cables and go to DIAGNOSTIC PROCEDURE 3, for final checking. Procedure 3