Fluid Leakage Inspection

Check the lines for improper attachment, leaks, cracks, damage, chafing or deterioration.

1. Run engine between idle speed and 1,000 rpm.
- Make sure fluid temperature in reservoir tank rises to 60 to 80°C (140 to 176°F).
2. Turn steering wheel right-to-left several times.
3. Hold steering wheel at each lock position for five seconds and carefully check for fluid leakage.

CAUTION: Do not hold the steering wheel in a locked position for more than 15 seconds.

4. If fluid leakage at any line is noticed, loosen flare nut and then retighten.
- Do not overtighten flare nut as this can damage O-ring, washer and threads.





5. If fluid leakage from power steering pump is noticed, check power steering pump. Refer to Image.
6. Check rack boots for accumulation of power steering fluid.