CONSULT Inspection Procedures

CONSULT

Consult Inspection Procedure




1. Turn off ignition switch.
2. Connect "CONSULT" to data link connector for CONSULT.




3. Turn ignition switch ON.
4. Turn on Automatic Speed Control Device (ASCD) main switch.
5. Touch START (on CONSULT display).
6. Touch ASCD.
7. Touch SELF-DIAG RESULTS.




^ Self-diagnostic results are shown on display.




8. Touch DATA MONITOR.




^ Touch START.
^ Data monitor results are shown on display.




Self-Diagnostic Results




Data Monitor