Manual

FAN CONTROL SWITCH
This switch turns the fan ON and OFF, and controls fan speed.

MODE SWITCHES
These switches allow control of the air discharge outlets.

When the MODE switch is moved to "DEF" or "F/D", the push control amplifier sets the intake door to "FRESH". The compressor turns on when the MODE switch is moved to "DEF".

TEMPERATURE CONTROL LEVER
This lever allows you to adjust the temperature of the discharge air.

RECIRCULATION (REC) SWITCH

OFF position: Outside air is drawn into the passenger compartment.
ON position: Interior air is recirculated inside the vehicle.

Recirculation is canceled when DEF or F/D is selected, and resumes when another mode is chosen.

Intake door is set at recirculation position automatically when the following conditions are met:
^ VENT position
^ Fan speed: speed 4 position
^ Temperature control: Full cold position
^ Compressor: ON
^ VENT, B/L, FOOT position
^ Engine coolant temperature: Over 105°C (221°F)
^ Compressor: ON

AIR CONDITIONING SWITCH
Start the engine, set the fan control switch to the desired (1 to 4) position and push the air conditioning switch to turn ON the air conditioning. The indicator lamp will come on when the air conditioning is ON. To stop the air conditioning, push the switch again to return it to the original position.

The air conditioning cooling function operates only when the engine is running.