With CONSULT II Scan Tool

Reading Consult-II Screen Terms




1. Turn ignition switch "OFF".
2. Connect "CONSULT" to the data link connector.




3. Turn ignition switch "ON".
4. Touch "START".




5. Touch "IVMS".




6. Perform each diagnostic item according to the item application chart.

IVMS Communication Diagnosis




1. Touch "IVMS COMM DIAGNOSIS" in "IVMS-COMM CHECK".




2. Touch "START".




3. If no failure is detected, inspection is end.





If any problem code is displayed, repair/replace the system according to the IVMS communication diagnosis results.

4. Erase the diagnostic results memory.
a. Turn ignition switch "ON".
b. Touch "IVMS".
c. Touch "IVMS COMM DIAGNOSIS" in "IVMS-COMM CHECK".
d. Touch "START" for "IVMS COMM DIAGNOSIS".
e. Touch "ERASE".