Fluid - A/T: Service and Repair

CHANGING A/T FLUID
1. Warmup A/T fluid.
2. Stop engine.
3. Drain A/T fluid from drain plug and refill with new A/T fluid. Always refill same volume with drained fluid.

Fluid grade:
Nissan Matic "D" (Continental U.S. and Alaska) or Genuine Nissan Automatic Transmission Fluid
(Canada)
Refer to "RECOMMENDED FLUIDS AND LUBRICANTS".

Fluid capacity (With torque converter):
9.4 l (10 US qt, 8-1/4 Imp qt)

Drain plug:
29 - 39 Nm (3.0 - 4.0 kg-m, 22 - 29 ft-Ib.)

4. Run engine at idle speed for five minutes.
5. Check fluid level and condition. Refer to "Checking A/T Fluid". If fluid is still dirty, repeat step 2 through 5.