| Surface Flatness | | Standard | | Less Than 0.03 Millimeter (mm) |
| | Limit | | 0.1 Millimeter (mm) |
| Cylinder Bore | Inner Diameter | Standard | Grade No. 1 | 86.000 - 86.010 Millimeter (mm) |
| | | Grade No. 2 | 86.010 - 86.020 Millimeter (mm) |
| | | Grade No. 3 | 86.020 - 86.030 Millimeter (mm) |
| | Wear Limit | | 0.2 Millimeter (mm) |
| Out-Of-Round (X - Y) | | | | Less Than 0.015 Millimeter (mm) |
| Taper (A - B) | | | | Less Than 0.010 Millimeter (mm) |
| Difference In Inner Diameter Between Cylinders | | Limit | | Less Then 0.05 Millimeter (mm) |
| Main Journal Inner Diameter | | | Grade No. 0 | 58.944 - 58.950 Millimeter (mm) |
| | | Grade No. 1 | 58.950 - 58.956 Millimeter (mm) |
| | | Grade No. 2 | 58.956 - 58.962 Millimeter (mm) |
| | | Grade No. 3 | 58.962 - 58.968 Millimeter (mm) |