General Specifications

Cylinder Block Distortion			Standard	Less Than 0.03
			Limit	0.10
Cylinder Bore	Inner Diameter	Grade 1	Standard	89.000 - 89.010
			Limit	0.2
		Grade 2	Standard	89.010 - 89.020
			Limit	0.2
		Grade 3	Standard	89.020 - 89.030
			Limit	0.2
	Out-Of-Round (X - Y)		Standard	Less Than 0.015
	Taper (A - B)		Standard	Less Than 0.010
Difference In Inner Diameter Between Cylinders			Standard	Less Than 0.03 mm
			Limit	0.2 mm
Nominal Cylinder Block Height : H (From crankshaft center)			Standard	246.95 - 247.05
			Limit	0.2 Total amount of cylinder head resurfacing plus cylinder block resurfacing.