Marker Lamp: Service and Repair

The headlamp assembly must be removed to replace the headlamp bulb, front parking and cornering lamp bulb or front side marker bulb.

FRONT PARKING AND SIDE MARKER LAMP
1. Disconnect the battery negative (-) cable.





2. Remove the four screws from the bottom of the front fender protector and position the front fender protector aside to access the headlamp mounting nut.





3. Remove the three headlamp mounting nuts and one headlamp mounting bolt.
4. Pull the headlamp assembly evenly away from the front of the vehicle to access the bulb sockets.
5. Rotate the bulb socket counter clockwise and remove it from the assembly.
Do not shake the bulb socket when removing it.
6. Pull the bulb out of the socket and replace.
7. Install in the reverse order of removal