Fluid - A/T: Service and Repair

1. Warm up A/T fluid.
2. Stop engine.
3. Drain A/T fluid from drain plug and refill with new A/T fluid. Measure amount of fluid drained and refill with equal amount of new fluid.
Fluid grade:
NISSAN Matic 'D' (Continental U.S. and Alaska) or Canada NISSAN Automatic Transmission Fluid.
Fluid capacity (With Torque Converter):
9.4 l (10 US qt, 8 - 114 Imp qt)
Drain plug:
29 - 39 Nm (3.0 - 4.0 kg.m, 22 - 29 ft.lb)
4. Run engine at idle speed for five minutes.
5. Check fluid level and condition. Refer to "Checking A/T Fluid".
Fluid Leakage and Condition Check

If fluid is still dirty, repeat steps 2 through 5.