Precautions For Seat Belt Service

CAUTION:
* Before removing the seat belt pre-tensioner assembly, turn the ignition switch OFF, disconnect both battery cables and wait at least 3 minutes.
* Do not use electrical test equipment for seat belt pre-tensioner connector.
* After replacing or reinstalling seat belt pre-tensioner assembly, or reconnecting seat belt pre-tensioner connector, check the system function. Refer to "Self-diagnosis" for details.
* Do not use disassemble buckle or seat belt assembly.
* Replace anchor bolts if they are deformed or worn out.
* Never oil tongue and buckle.
* If any component of seat belt assembly is questionable, do not repair. Replace the whole seat belt assembly.
* If webbing is cut, frayed, or damaged, replace seat belt assembly.
* When replacing seat belt assembly, use a genuine seat belt assembly.