Fog/Driving Lamp: Adjustments

Aiming Adjustment
Before performing aiming adjustment, make sure of the following.
a. Keep all tires inflated to correct pressure.
b. Place vehicle on level ground.
c. Check that vehicle is unloaded (except for full levels of coolant, washer fluid, engine oil and fuel, and spare tire, jack, and tools). Have the driver or equivalent weight placed in driver's seat.





1. Set the distance between the screen and the center of the fog lamp lens as shown at left.
2. Turn front fog lamps ON.





3. Adjust front fog lamps so that the top edge of the high intensity zone is 100 mm (4 in) below the height of the fog lamp centers as shown at left.
- When performing adjustment, if necessary, cover the headlamps and opposite fog lamp.