Radius Arm: Service and Repair
REMOVAL AND INSTALLATIONParallel link and radius link
Remove parallel link and radius link.
- Models without ABS -
- When installing front parallel link, make sure that paint mark faces in the correct direction.
- During installation, final tightening must be carried out at curb weight with tires on the ground.
- After installation, check wheel alignment.
- Check parallel link for cracks, deformation and other damage. Replace if necessary.
- Check radius link for cracks, deformation and other damage. Replace if necessary.
Stabilizer bar
- Remove stabilizer bar.
- When installing stabilizer, align paint marks with inside edge of clamps.
- Install stabilizer bar with ball joint socket properly placed.