General Specifications
| Camshaft Journal to Bearing Clearance | No.1 | Standard | 0.045 - 0.086 Millimeter (mm) |
| Limit | 0.15 Millimeter (mm) | ||
| No.2, 3, 4 | Standard | 0.035 - 0.076 Millimeter (mm) | |
| Limit | 0.15 Millimeter (mm) | ||
| Inner Diameter of Camshaft Bearing | No.1 | Standard | 26.000 - 26.021 Millimeter (mm) |
| No.2, 3, 4 | Standard | 23.500 - 23.521 Millimeter (mm) | |
| Outer Diameter of Camshaft Journal | No.1 | Standard | 25.935 - 25.955 Millimeter (mm) |
| No.2, 3, 4 | Standard | 23.445 - 23.465 Millimeter (mm) | |
| Camshaft Runout [TIR] = Total indicator reading | Standard | Less Than 0.02 Millimeter (mm) | |
| Limit | 0.05 Millimeter (mm) | ||
| Camshaft Sprocket Runout [TIR] = Total indicator reading | Standard | Less Than 0.15 Millimeter (mm) | |
| Camshaft End Play | Standard | 0.115 - 0.188 Millimeter (mm) | |
| Limit | 0.24 Millimeter (mm) | ||
| Cam Height "A" | Intake | 43.940 - 44.130 Millimeter (mm) | |
| Exhaust | 44.495 - 44.655 Millimeter (mm) | ||
| Wear Limit of Cam Height | 0.2 Millimeter (mm) |