Fluid - A/T: Service and Repair

1. Warm up A/T fluid.
2. Stop engine.




3. Drain A/T fluid from drain plug and refill with new A/T fluid. Always refill same volume with drained fluid.

Fluid grade:
Nissan Matic "D" (Continental U.S. and Alaska) or Canada NISSAN Automatic Transmission Fluid.
Refer to "RECOMMENDED FLUIDS AND LUBRICANTS".

Fluid capacity (With torque converter):
RE4FO4B / RE4FO4W
9.4 l (10 US qt, 8-1/4 Imp qt)

Drain plug:
Tightening Torque: 29 - 39 Nm (3.0 - 4.0 kg.m, 22 - 29 ft.lb)

4. Run engine at idle speed for five minutes.
5. Check fluid level and condition. Refer to "Checking A/T Fluid".
If fluid is still dirty, repeat step 2.through 5.