General Specifications
| Surface Flatness | Standard | Less Than 0.03 Millimeter (mm) | ||
| Limit | 0.10 Millimeter (mm) | |||
| Cylinder Bore | Inner Diameter | Standard | Grade No.1 | 93.000 - 93.010 Millimeter (mm) |
| Grade No.2 | 93.011 - 93.020 Millimeter (mm) | |||
| Grade No.3 | 93.021 - 93.030 Millimeter (mm) | |||
| Wear Limit | 0.20 Millimeter (mm) | |||
| Out-Of-Round (X - Y) | Less Than 0.015 Millimeter (mm) | |||
| Taper (A - B) | Less Than 0.015 Millimeter (mm) |