Fuel Pressure Release Procedure

With CONSULT-II

1. Turn the ignition switch "ON".

2. Connect CONSULT-II and perform the "Fuel Pressure Release" function in the "Work Support Mode".

3. Start the engine and let it run until it stalls.

4. Crank the engine two or three times to release all fuel pressure.

5. Turn the ignition switch "OFF".

Without CONSULT-II

1. Remove the fuel pump fuse from the fuse box.

2. Start the engine and let it run until it stalls.

3. Crank the engine two or three times to release all fuel pressure.

4. Turn the ignition switch "OFF".

5. Re-install the fuel pump fuse AFTER connecting the fuel pressure gauge.