Non-Trouble Code Procedures

PRELIMINARY CHECK
The system operation is canceled by turning ignition switch to "ACC" at any step between START and ARMED in the following flow chart.

For details of "Pattern A" and "Pattern B" theft warning system settings, refer to "INITIAL CONDITION TO ACTIVATE THE SYSTEM".
After performing preliminary check, go to symptom chart on next page.

Symptom Chart:

SYMPTOM CHART
Before starting trouble diagnoses above, perform "PRELIMINARY CHECK".
Symptom numbers in the symptom chart correspond with those of preliminary check.

POWER SUPPLY AND GROUND CIRCUIT CHECK







Power Supply Circuit Check







Ground Circuit Check

DOOR, HOOD AND TRUNK ROOM LAMP SWITCH CHECK

Step 1:

Step 2:

Door Switch Check

Steps 1 - 2:

Step 3:

Hood Switch Check

Steps 1 - 2:

Trunk Room Lamp Switch Check

Steps 1 - 2:

Step 3:

SECURITY INDICATOR LAMP CHECK

Steps 1 - 2:

FRONT DOOR UNLOCK SENSOR CHECK

Step 1:

Step 2:

DOOR KEY CYLINDER SWITCH CHECK

Steps 1 - 2:

TRUNK LID KEY CYLINDER SWITCH CHECK

Step 1:

Step 2:

DOOR LOCK/UNLOCK SWITCH CHECK

Steps 1 - 2:

Step 3:

Step 4:

THEFT WARNING HORN AND HEADLAMP ALARM CHECK