Sunroof Assembly

- After any repair, check sunroof operation and glass lid alignment.
- Handle finisher plate and glass lid with care so as not to cause damage.
- To ease installation, mark each point before removal.


CAUTION: Always work with a helper.

1. Remove headlining. Refer to "Removal and Installation".
2. Disconnect front and rear drain hoses.[G]
3. Remove the two screws securing sunroof motor to sunroof assembly.[H]
4. Remove sunroof motor and bracket.[J]
5. Remove bolts securing sunroof assembly to roof.[K]
6. Remove sunroof assembly.[L]