General Specifications
| Surface Flatness | Standard | Less Than 0.03 Millimeter (mm) | ||
| Limit | 0.1 Millimeter (mm) | |||
| Height "H" (nominal) | Standard | 213.95 - 214.04 Millimeter (mm) | ||
| Cylinder Bore Inner Diameter | Standard | Grade No.1 | Standard | 80.000 - 80.010 Millimeter (mm) |
| Limit | 0.2 Millimeter (mm) | |||
| Grade No.2 | Standard | 80.010 - 80.020 Millimeter (mm) | ||
| Limit | 0.2 Millimeter (mm) | |||
| Grade No.3 | Standard | 80.020 - 80.030 Millimeter (mm) | ||
| Limit | 0.2 Millimeter (mm) | |||
| Out-Of-Round (X - Y) | Standard | Less Than 0.015 Millimeter (mm) | ||
| Taper (A - B) | Standard | Less Than 0.01 mm | ||
| Difference In Inner Diameter Between Cylinders | Standard | 0.05 mm | ||
| Limit | 0.2 mm |