Scan Tool Testing and Procedures

CONSULT-II Inspection Procedure (With Multi-Remote Control System)

"KEY WARN ALM"/"LIGHT WARN ALM"/"SEAT BELT ALM"




1. Turn ignition switch "OFF".
2. Connect "CONSULT-II" to the data link connector.




3. Turn ignition switch "ON".
4. Touch "START".




5. Touch "SMART ENTRANCE".




6. Touch "KEY WARN ALM", "LIGHT WARN ALM" or "SEAT BELT ALM".




7. Select diagnosis mode.
"DATA MONITOR" and "ACTIVE TEST' are available for the warning chime.

CONSULT-II Application Items (With Multi-Remote Control System)

"KEY WARNING ALARM"




Data Monitor




Active Test

"LIGHT WARN ALM"




Data Monitor




Active Test

"SEAT BELT WARM ALM"




Data Monitor




Active Test