Start Signal

CONSULT-II Reference Value in Data Monitor Mode
Specification data are reference values.

EC-S/SIG-01:

EC-S/SIG-01 - Connector View:

WIRING DIAGRAM




PCM TERMINALS AND REFERENCE VALUE MEASURED BETWEEN EACH TERMINAL AND GROUND.

CAUTION: DO NOT USE PCM GROUND TERMINALS WHEN MEASURING INPUT/OUTPUT VOLTAGE. DOING SO MAY RESULT IN DAMAGE TO THE PCM'S TRANSISTOR. USE A GROUND OTHER THAN PCM TERMINALS, SUCH AS THE GROUND.

Step 1:

Step 2:

Step 3:

Step 4:

Step 5:

DIAGNOSTIC PROCEDURE