Reading and Clearing Diagnostic Trouble Codes

CONSULT-II Inspection Procedure (With Multi-Remote Control System)

"REAR DEFOGGER"




1. Turn ignition switch "OFF".
2. Connect "CONSULT-II" to the data link connector.




3. Turn ignition switch "ON".
4. Touch "START".




5. Touch "SMART ENTRANCE".




6. Touch "REAR DEFOGGER".




7. Select diagnosis mode.
"DATA MONITOR" and "ACTIVE TEST" are available.

CONSULT-II Application Items (With Multi-Remote Control System)

"REAR DEFOGGER"




Data Monitor




Active Test