Cooling System: Service Precautions

LIQUID GASKET APPLICATION PROCEDURE





1. Use a scraper to remove all traces of old RTV Silicone Sealant from mating surfaces and grooves. Also, completely clean any oil from these areas.
2. Apply a continuous bead of Genuine RTV Silicone Sealant Part No. 999MP-A7007 or equivalent to mating surfaces.
^ For oil pan, be sure RTV Silicone Sealant diameter is 4.0 to 5.0 mm (0.157 to 0.197 inch).
^ For areas except oil pan, be sure RTV Silicone Sealant diameter is 2.0 to 3.0 mm (0.079 to 0.118 inch).





3. Apply RTV Silicone Sealant around the inner side of bolt holes (unless otherwise specified).
4. Assembly should be done within 5 minutes after coating.
5. Wait at least 30 minutes before refilling engine oil and engine coolant.