System Specifications
GENERAL SPECIFICATIONS
Transaxle
Final Gear
GEAR END PLAY
CLEARANCE BETWEEN BAULK RING AND GEAR
3rd, 4th & 5th
Reverse Baulk Ring
1st & 2nd Double Baulk Ring
AVAILABLE SNAP RINGS
3rd & 4th Synchronizer Hub (At Input Shaft)
1st & 2nd Synchronizer Hub (At Mainshaft)
5th Main Gear (At Mainshaft)
AVAILABLE THRUST WASHER
4th Input Gear (At Input Shaft)
Differential Side Gear Thrust Washer
AVAILABLE SHIMS - INPUT SHAFT END PLAY, MAINSHAFT, DIFFERENTIAL SIDE BEARING PRELOAD AND ADJUSTING SHIM
Bearing Preload and End Play
Turning Torque (New Bearing)
Mainshaft Bearing Adjusting Shim
Table For Selecting Mainshaft Adjusting Shim(s)
Input Shaft Bearing Adjusting Shim
Table For Selecting Input Shaft Bearing Adjusting Shim(s)
Differential Side Bearing Adjusting Shim
Table For Selecting Differential Side Bearing Adjusting Shim(s)