General Specifications
| Connecting Rod | Center Distance (S) | Standard | 164.95 - 165.05 Millimeter (mm) |
| Bend [per 100 mm] | Limit | 0.15 Millimeter (mm) | |
| Torsion [per 100 mm] | Limit | 0.30 Millimeter (mm) | |
| Piston Pin Bushing Inner Diameter (d) | Standard | 23.987 - 24.000 Millimeter (mm) | |
| Connecting Rod Big End Inner Diameter (D) Without bearing | Standard | 53.000 - 53.013 Millimeter (mm) | |
| Side Clearance | Standard | 0.2 - 0.4 Millimeter (mm) | |
| Limit | 0.6 Millimeter (mm) | ||
| Connecting Rod Bearing Clearance | Standard | 0.010 - 0.035 Millimeter (mm) | |
| Limit | 0.09 Millimeter (mm) | ||
| Connecting Rod Bearing Cap | Tightening Torque | 46 - 56 Newton Meter (Nm) | |
| Sequence | Refer to Procedure Under Cylinder Block Assemby; Service and Repair. |