Diameters and Limits
| Crankshaft | Main Journal Diameter (Dm) | Grade No.0 | 59.967 - 59.975 Millimeter (mm) | |
| Grade No.1 | 59.959 - 59.967 Millimeter (mm) | |||
| Grade No.2 | 59.951 - 59.959 Millimeter (mm) | |||
| Pin Journal Diameter (Dp) | Grade No.0 | 49.968 - 49.974 Millimeter (mm) | ||
| Grade No.1 | 49.962 - 49.968 Millimeter (mm) | |||
| Grade No.2 | 49.956 - 49.962 Millimeter (mm) | |||
| Center Distance (r) | 47.95 - 48.05 mm | |||
| Taper Of Main or Pin Journal (A - B) | Main | Standard | 0.01 Millimeter (mm) | |
| Pin | Standard | 0.005 Millimeter (mm) | ||
| Out-Of-Round Of Main or Pin Journal (X - Y) | Main | Standard | 0.01 Millimeter (mm) | |
| Pin | Standard | 0.005 Millimeter (mm) | ||
| Runout [TIR] = Total indicator reading | Standard | 0.10 Millimeter (mm) | ||
| Free End Play | Standard | 0.05 - 0.18 Millimeter (mm) | ||
| Limit | 0.3 Millimeter (mm) | |||
| Fillet Roll | Standard | More Than 0.1 mm |