Methods of Preventing Over-Discharge

CAUTION:
If it becomes necessary to start the engine with a booster battery and jumper cables:
- Use a 12 Volt booster battery.
- After connecting battery cables, ensure that they are tightly clamped to battery terminals for good contact.
- Never add distilled water through the hole used to check specific gravity




The following precautions must be taken to prevent over-discharging a battery.
- The battery surface (particularly its top) should always be kept clean and dry.
- The terminal connections should be clean and tight.
- At every routine maintenance, check the electrolyte level.




- When the vehicle is not going to be used over a long period of time, disconnect the negative battery terminal. (If the vehicle has an extended storage switch, turn it off.)




- Check the charge condition of the battery.
Periodically check the specific gravity of the electrolyte.
Keep a close check on charge condition to prevent overdischarge.