TCM Self-Diagnosis Does Not Activate

TCM Self-diagnosis Does Not Activate (PNP, Overdrive Control and Throttle Position Switches Circuit Checks)
SYMPTOM: O/D OFF indicator lamp does not come on in TCM self-diagnostic procedure even the lamp circuit is good.

DESCRIPTION





^ Park/Neutral Position (PNP) switch
The Park/Neutral (PNP) switch assembly includes a transmission range switch. The transmission range switch detects the selector lever position and sends a signal to the TCM.





^ Overdrive control switch
Detects the overdrive control switch position (ON or OFF) and sends a signal to the TCM.





^ Throttle position switch
Consists of a wide open throttle position switch and a closed throttle position switch.
The wide open throttle position switch sends a signal to the TCM when the throttle valve is open at least 1/2 of the full throttle position. The closed throttle position switch sends a signal to the TCM when the throttle valve is fully closed.

DIAGNOSTIC PROCEDURE





Chart 1 - 2





Chart 3





Chart 4 - 5





Chart 6





Chart 7





Chart 8 - 9





Chart 10





Chart 11





Chart 12 - 14

NOTE: The diagnostic procedure includes inspections for the overdrive control and throttle position switch circuits.