Collision Diagnosis
FOR FRONTAL COLLISIONTo repair the SRS, perform the following steps.
When SRS (except the side air bag) is activated in a collision:
1. Replace the diagnosis sensor unit.
2. Remove the air bag modules (except the side air bag module) and front seat belt pre-tensioner assemblies.
3. Check the SRS components using the table shown:
- Replace any SRS components showing visible signs of damage (dents, cracks and deformation).
4. Install new air bag modules (except the side air bag module) and front seat belt pre-tensioner assemblies.
5. Conduct self-diagnosis using CONSULT-II or "AIR BAG" warning lamp. Refer to "SRS Operation Check" for details. Ensure entire SRS operates properly.
When SRS is not activated in a collision:
1. Check the SRS components using the table shown:
- Replace any SRS components showing visible signs of damage (dents, cracks and deformation).
2. Conduct self-diagnosis using CONSULT-II or "AIR BAG" warning lamp. Refer to "SRS Operation Check" for details. Ensure entire SRS operates properly.
Part 1:
Part 2:
FOR SIDE COLLISION
To repair the SRS for a side collision, perform the following steps.
When the side air bag is activated in the side collision:
1. Replace the following components:
- All parts of seat back (including seat back frame) with side air bag module (on the side on which side air bag is activated)
- Diagnosis sensor unit
- Side air bag (satellite) sensor (on the side on which side air bag is activated)
2. Check the SRS components and the related parts using the table shown.
- Replace any SRS components and the related parts showing visible signs of damage (dents, cracks, deformation).
3. Conduct self-diagnosis using CONSULT-II and "AIR BAG" warning lamp. Refer to "SRS Operation Check" for details. Ensure entire SRS operates properly.
When SRS is not activated in the side collision:
1. Check the SRS components and the related parts using the table shown.
- Replace any SRS components and the related parts showing visible signs of damage (dents, cracks, deformation).
2. Conduct self-diagnosis using CONSULT-II and "AIR BAG" warning lamp. Refer to "SRS Operation Check" for details. Ensure entire SRS operates properly.
Part 1:
Part 2:
