Cylinder Head Torque & Sequence

a. Tighten all bolts to 39 Nm (4.0 kg-m, 29 ft. lbs.).
b. Tighten all bolts to 78 Nm (8.0 kg-m, 58 ft. lbs.).
c. Loosen all bolts completely.
d. Tighten all bolts to 34 to 44 Nm (3.5 to 4.5 kg-m, 25 to 33 ft. lbs.).





e. Method A: Turn all bolts 90 to 95 degrees clockwise with Tool or suitable angle wrench.
Method B: If an angle wrench is not available, mark all cylinder head bolts on the side facing engine front. Then, turn each cylinder head bolt 90 to 95 degrees clockwise.
f. Turn all bolts another 90 to 95 degrees clockwise.











g. Ensure that paint mark on each bolt faces the rear of the engine. (Method B only)
Do not turn any bolt 180 to 190 degrees clockwise all at once.

Install cylinder head outside bolts.