Fuel Pump: Testing and Inspection
1. Disconnect fuel level sensor unit and fuel pump harness connector.
2. Check resistance between terminals 1 and 3.
Resistance: 0.2 - 5.0 Ohms [at 25 °C (77 °F)]
If NG, replace fuel pump.
1. Disconnect fuel level sensor unit and fuel pump harness connector.
2. Check resistance between terminals 1 and 3.
Resistance: 0.2 - 5.0 Ohms [at 25 °C (77 °F)]
If NG, replace fuel pump.