Non-Trouble Code Procedures

PRELIMINARY CHECK
The system operation is canceled by turning ignition switch to "ACC" at any step between START and ARMED in the flow chart.

For details of "Pattern A" and "Pattern B" vehicle security system settings, refer to "INITIAL CONDITION TO ACTIVATE THE SYSTEM".

*: Refer to "NVIS (NISSAN VEHICLE IMMOBILIZER SYSTEM - NATS)".

After performing preliminary check, go to symptom chart.




SYMPTOM CHART
Before starting trouble diagnoses, perform "PRELIMINARY CHECK".

Symptom numbers in the symptom chart correspond with those of preliminary check.

POWER SUPPLY AND GROUND CIRCUIT CHECK




Power Supply Circuit Check




Ground Circuit Check

DOOR, HOOD AND TRUNK ROOM LAMP SWITCH CHECK

Step 1:

Step 2:

Door Switch Check

Steps 1 - 2:

Step 3:

Hood Switch Check

Steps 1 - 2:

Trunk Room Lamp Switch Check

Steps 1 - 2:

Step 3:

SECURITY INDICATOR LAMP CHECK

Steps 1 - 2:

FRONT DOOR UNLOCK SENSOR CHECK

Step 1:

Step 2:

DOOR KEY CYLINDER SWITCH CHECK

Steps 1 - 2:

TRUNK LID KEY CYLINDER SWITCH CHECK

Step 1:

Step 2:

DOOR LOCK/UNLOCK SWITCH CHECK

Steps 1 - 2:

Step 3:

Step 4:

VEHICLE SECURITY HORN AND HEADLAMP ALARM CHECK