Removal and Installation

Part 1 of 2





Part 2 of 2

Removal and Installation

CAUTION:
^ When installing sliding parts such as bearings and pistons, apply engine oil on the sliding surfaces.
^ Place removed parts, such as bearings and bearing caps, in their proper order and direction.
^ When installing connecting rod nuts and main bearing cap bolts, apply new engine oil to threads and seating surfaces.
^ Do not allow any magnetic materials to contact the signal plate teeth of flywheel or drive plate, and rear plate.
^ Remove the crankshaft position sensor (POS).
^ Be careful not to damage sensor edges and signal plate teeth.