Pinout Values and Diagnostic Parameters

ECM Harness Connector Terminal Layout:

ECM Terminals and Reference Value

PREPARATION




1. ECM is located behind the glove box. For this inspection, remove glove box.
2. Remove ECM harness protector.




3. Perform all voltage measurements with the connector connected. Extend tester probe as shown to perform tests easily.
- Open harness securing clip to make testing easier.
- Use extreme care not to touch 2 pins at one time.
- Data is for comparison and may not be exact.

ECM Inspection Table Part 1:

ECM Inspection Table Part 2:

ECM Inspection Table Part 3:

ECM Inspection Table Part 4:

ECM Inspection Table Part 5:

ECM Inspection Table Part 6:

ECM Inspection Table Part 7:

ECM Inspection Table Part 8: