Fog/Driving Lamp: Service and Repair

Removal and Installation
The fog lamp is a semi-sealed beam type which uses a replaceable halogen bulb.

CAUTION:
- Do not leave fog lamp assembly without bulb for a long period of time. Dust, moisture, smoke, etc. entering the fog lamp body may affect the performance. Remove the bulb from the headlamp assembly just before replacement bulb is installed.
- Grasp only the plastic base when handling the bulb. Never touch the glass envelope. Touching the glass could significantly affect the bulb life and/or fog lamp performance.




1. Remove the fender protector.
2. Disconnect electrical connector.
3. Remove bolt, and slide fog lamp out of front fascia. Install in the reverse order of removal.