Dashboard / Instrument Panel: Service and Repair

Removal and Installation
1. Steering column cover.
2. Instrument panel assembly.
3. Passenger side air bag.
4. RH instrument mask.
5. LH instrument mask.
6. Vehicle identification plate.
7. Cluster lid A.
8. Glove box striker.
9. Cluster lid C.
10. Cluster lid D.
11. Deck pocket.
12. Steering member assembly.
13. RH audio bracket.
14. LH audio bracket.
15. RH instrument member bracket.
16. Driver instrument stay.
17. LH lower knee protector.
18. Bolt cap.
19. Side ventilator grille RH.
20. Side ventilator grille LH.
21. Lower driver instrument panel.
22. Steering lock escutcheon.
23. Glove box assembly.
24. Fuse block cover.
25. Switch mask.
26. Center console assembly.
27. Front console bracket.
28. Front console box assembly.
29. A/T console finisher.
30. Console boot manual transmission.
31. Console finisher rear.
32. Console front side panel RH.

Work Steps:

REMOVAL AND INSTALLATION




Cluster Lid C
1. Pull lid toward rear of vehicle.
- Disconnect electrical connectors.




Cluster Lid D
1. Remove cluster lid C. Refer to "Cluster Lid C"
2. Remove cluster lid D.
1. Remove screw using power tool.
2. Pull lid toward rear of vehicle to release clips.




Driver Lower Instrument Panel
1. Remove cluster lid C. Refer to "Cluster Lid C"
2. Remove fuse box cover.




3. Remove screws using power tool, and lower instrument cover.
- Pull to disconnect clips.




Cluster Lid A
1. Remove driver lower instrument panel. Refer to "Driver Lower Instrument Panel"
2. Pull toward rear of vehicle to release clips.
- Disconnect indicator lamp sockets.




Combination Meter
1. Remove cluster lid A. Refer to Cluster Lid A.
2. Remove screws using power tool, pull from opening, disconnect electrical connectors and remove combination meter.




A/T Finisher
1. Pull up to release clips.




M/T Finisher
1. Remove shifter knob.
2. Pull up to release clips.




Cup Holder
1. Open storage bin B.
2. Remove console finisher.
3. Remove screw cover, screw using power tool and cup holder.
- Pull up to release clips.




Glove Box
1. Remove glove box striker.
2. Remove screws using power tool.
3. Pull towards rear of car to release clips, disconnect lamp socket, and remove glove box.

Center Console:

Disassembly and Assembly

CENTER CONSOLE
1. Remove center console assembly. Refer to Work Steps
2. Remove cup holder.
3. Remove armrest assembly
4. Remove adjustable armrest track.
5. Separate adjustable armrest slide from adjustable armrest track.
6. Separate adjustable armrest trim cover from adjustable armrest slide.
7. Remove storage bin A.
8. Remove hinge assembly.
9. Remove hinge reinforcement and storage bin B.
10. Separate hinge reinforcement from storage bin B.
11. Remove power point from storage bin B.
12. Assembly is the reverse order of disassembly