Console Box Lid - Retainer Clip Availability

Classification:
BT02-002

Reference:
NTB02-014

Date:
January 31, 2002

FRONT CONSOLE BOX LID RETAINER CLIP AVAILABILITY

APPLIED VEHICLE:
2002 Altima (L31)

SERVICE INFORMATION

The front console box lid retainer clip is now available as a separate service part, should clip replacement become necessary. The entire console box assembly does NOT need to be ordered to obtain the retainer clip.

SERVICE PROCEDURE

Install the replacement retainer clip as follows:

1. Remove the old retainer clip by pulling it out of the console face with a pair of pliers being careful not to damage the console face.

NOTE:
If you cannot pull the clip out of the console face with pliers:

^ Remove the console box assembly (refer to the IP section of the applicable Service Manual for the console removal procedure)

^ Push the clip out from the backside of the console

2. Install the new retainer clip by pushing it into the face of the console making sure it is fully seated in the hole.

3. If previously removed, re-install the console box assembly.

4. Ensure the console door closes and properly latches.





PARTS INFORMATION

CLAIMS INFORMATION





Submit a Primary Failed Part (PP) line claim using the claims coding shown.